tile shower tray

SPECIFICATIONS

stile™ Tile Shower Tray

• One-piece, leak-proof tray, constructed of 3.0mm corrosion resistant, marine grade aluminium.
• Fully supported underneath.
• Single-plane slope 1:50 (20mm/m) to corner drain providing consistent drainage surface and easy tiling.
• Frontal threshold height 60mm.
• Side/ Rear upstand installed height 120mm.
• 18mm inside threshold step creates water-stop.
• Available in over 30 sizes/ configurations threshold or level entry -- concrete or timber floors.
• Includes an easy-clean trap with satin-finish drain cover. Centred in tray rear corner 85mm from each wall.
• Glass receiver channels factory - installed to inside of tray.
• Use approved modified cement-based tile adhesive or polyurethane adhesive for tile setting.
• Guaranteed Leak-proof for 25 years.

DryShield™Waterproof Wall Membrane

• A 1.5mm 'peel-n-stick' , impervious sheet membrane. Creates a thick barrier between tiles and walls.
• Doubles as an anti-fracture membrane - absorbs structural movement preventing cracked tiles and leaks.
• Use approved modified cement-based tile adhesive or polyurethane adhesive for tile setting.
• BRANZ Protecto Wrap Appraisal No.461. Accepted by councils.
• Guaranteed for 15 years.

Frameless Glass Enclosure

• 8mm thick clear, toughened-safety glass. 1900mm finished height off tray.
• Full enclosure or panel-only.
• Overpanel 6mm thickness secured with stainless steel brackets.
• Polished chrome-on-brass hinges.
• Two chrome-on-stainless steel 'D' handles.
• Satin-anodised wall channel.
• Glass receiver wall channels installed prior to tiling providing a watertight seal.
• Glass processed, tempered in NZ complies with -- NZBC F2 using NZS4223; AS/ NZS4660-2000; AS/ NZS2208.
• Guaranteed for 5 years.
• Glass Enclosure Options. pdf (Download may take a few minutes)

Approved Tile Adhesives

• Lataflex Gold and Lataflex Silver - polymer-modified cement based (onto DryShield membrane)
• Mapei Kerabond w/ Isolastic polymer additive (onto DryShield membrane)
• Mapei Keraflex - polymer modified cement based (onto DryShield membrane)
• Mapei Keralastic - 2 pack polyurethane (direct to aluminium tray)
• KeraKoll H40 Flex -- polymer-modified cement based (onto DryShield membrane)
• RLA Polymers -- Resin Flex -- polymer modified cement based (onto DryShield membrane)
• Polymer Engineering -- Flexi Wall & Floor -- polymer modified cement based (onto DryShield membrane)
• Fosroc Florbond 406 - 2 pack polyurethane (direct to aluminium tray)